Air bubbles entraps in concrete during mixing in cement mixers machine and pumping. Air packet which badly affect the strength of concrete and are seriously avoided on application. Antifoam AFO53C is an effective deaerator and antifoaming agent which reduce and resist to produce foam and release entrapped air.
Antifoam AFO53C
Surface Foam and Internal foam produced by entrapped air are the two major problems occur in Pulp and Paper industry. The internal foam affects the paper quality by formation of circular pin hole on paper and surface foam cause of overflow and cause of defect in sensors. Foam controlling agents are used in paper making to promote coalescence of air bubbles within white water and paper making stock as well as beak bubbles at the water surface. Different grades are available for controlling foam in paper making process as given below.
| Antifoam Type. | Available Grades. |
|---|---|
| Fatty oil Based Antifoam. | Antifoam AFF Sries |
| Mineral Oil Based Antifoam. | Antifoam AFM Series |
| Silicon Oil Based Antifoam. | Antifoam AFO Sries |
| Red Oil Based Antifoam | Antifoam AFR Sries |
Deaerator for Drilling Mud and Oil and Gas Air entrapped in drilling mud and badly affect the drilling efficiency. A mud additive used to lower interfacial tension so that trapped gas will readily escape from mud. Mechanical degassing equipment is commonly used along with defoamer. A chemical additive used to prevent the formation of foam during the preparation of a treatment fluid or slurries at surface. Excess foam created during the mixing process may cause handling and pumping difficulties and may interfere with the performance or quality control of the mixed fluid. Antifoam agents may also be used to break foams returned from the wellbore, following a treatment, in preparation for disposal of the fluids.
| Antifoam Type. | Available Grades. |
|---|---|
| Organic Ester Based Antifoam. | Antifoam AFE Sries |
| Mineral Oil Based Antifoam. | Antifoam AFM Series |
| Silicon Oil Based Antifoam. | Antifoam AFO Sries |
Antifoam for Paint and Surface Coating In paints and surface coating products the foam formation is the major problem which decrease production rate lower the product quality and difficult in product handling and packing. Defoamer or antifoaming agents are used to remove and resist to form foam during production, product handling and on application. Variety of foam controlling agents are available for Water based and oil-based system.
| Antifoam Type. | Available Grades. |
|---|---|
| Fattey Oil Based AntiFoam for water and oil system. | Antifoam AFF Sries |
| Mineral Oil Based Antifoam for water and oil system. | Antifoam AFM Series |
| Silicon Oil Based Antifoam for water system. | Antifoam AFO Sries |
| Modified Silicon Oil Based Antifoam for oil system. | Antifoam NSO Series |
Antifoam for Fertilizer and Nitro phosphate In fertilizer foam is the major problem which produced in acidification of phosphate rock in phosphate digesters. The phosphate rocks react with nitric acid to produce phosphoric acid and calcium nitrate. During this reaction excessive foam produced which reduce the production capacity and productivity. Foam controlling agents are used to avoid such problems. The reaction system is highly acidic and highly specialized defoamers are required to sustain in reaction conditions with excellent performance. We are offering an excellent defoamer and antifoaming agent for Nitro phosphate production.
Antifoam AS Series
During metal cutting and other metal work the cutting oils and other fluids are used to maintain temperature and lubricity which produce foam during working. The foam controlling agents are required to minimize the foam formation. Silicone based antifoaming agents are recommended for metal works.
Antifoam AFO Series Antifoam NSO Series
Agrochemicals are the emulsions of different active ingredients in water and oil-based system and variety of surfactants are used in their formulations. The emulsion formed in high speed blenders and high shear mixers in which the surfactants produced extensive foam and significantly reduces production capacity. The foam controlling agents are used to maintain foam at adequate level during production and packing. Different grades of defoamers and antifoaming agents are available to control foam in agrochemical formulations.
s| Antifoam Type. | Available Grades. |
|---|---|
| Fattey Oil Based AntiFoam for water system. | Antifoam AFF Sries |
| Mineral Oil Based Antifoam for water system. | Antifoam AFM Series |
| Silicon Oil Based Antifoam for water system. | Antifoam AFO Sries |
| Oil Based Silicon Oil Based Antifoam for oil system. | Antifoam NSO Series |
In textile, A variety of surfactants and wetting agents are used to improve fabric properties before dying. The surfactants produce extensive foaming and reduce process efficiency and badly affect pretreatment process. The foam controlling agents are used to remove foam during pretreatment process. The pretreatment is an alkaline process and antifoaming agent should be stable in alkaline conditions. We are offering silicone-based antifoam which is Highly Stable with temperature, pressure and alkalinity.
| Antifoam Type. | Available Grades. |
|---|---|
| Fattey Oil Based AntiFoam | Antifoam AFF Sries |
| Silicon Oil Based Antifoam for water system. | Antifoam AFO Series |
